New Rol/Ex Scheibenegge / Cross-Cutter harrow / Dechaumeur cross-cutt disk harrow
Przedbórz, Łódzkie
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 608 80...
Show
+48 608 800 049
+48 785 40...
Show
+48 785 402 177
Poland 
9.84 ft
Poland, Przedbórz, Łódzkie
13.12 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Przedbórz, Łódzkie
13.12 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Przedbórz, Łódzkie
13.12 ft
Poland, Białystok
13.12 ft
Poland, Białystok
26.25 ft
Poland, Przedbórz, Łódzkie
3.28 ft
Poland, Przedbórz, Łódzkie
16.4 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Przedbórz, Łódzkie
9.84 ft
Poland, Rutki-Kossaki
- Working width: 4 m
- 450 mm discs cross cutter type
- Maintenance-free hub
- Spacing between disc rows: 100 cm
- 500 mm tubular roller
- Two-stage Front three-point linkage 2/3 cat
- Power requirement: 120-180 HP
- Weight: 1840 kg
Optional equipment:
- Differen roller type
- Hydraulic adjustment of the rear roller
- Floating side screens
- Row of rakes in front of the roller
- Trolley behind the roller
- Lighting
- Arbeitsbreite: 4 m
- 450-mm-Cross-Cutter-Scheiben
- Wartungsfreie Nabe
- Abstand zwischen den Scheibenreihen: 100 cm
- 500-mm-Rohrstabwalze
- Zweistufige Dreipunktaufnahme der Kategorie II/III
- Leistungsbedarf: 120-180 PS
- Gewicht: 1840 kg
Optionale Ausstattung:
- diverse Nachläufer
- Hydraulische Nachläuferverstellung
- Aktive Seitenwände
- Striegelleiste vor dem Nachläufer
- Fahrwerk hinter der Nachläuferwalze
- Beleuchtung
- Largeur de travail: 4 m
- Disques de 450 mm de type crosscutter
- Roulement sans entretien
- Distance entre les rangées de disques: 100 cm
- Rouleau tubulaire 500 mm
- Attelage trois points à deux étages CAT. II/III
- Puissance requise: 120-180 HP
- Poids: 1840 kg
Équipement en option:
- Différents types de rouleau
- Réglage hydraulique du rouleau arrière
- Écrans latéraux flottants
- Rangée de herse devant le rouleau
- Chariot de transport derrière le rouleau
- Éclairage
- larghezza di lavoro 4 m
- dischi 450 mm tipo cross- cutter
- bulloni senza manutenzione
- distanza tra le file di dischi 100 cm
- rullo tubolare 500 mm
- atacco a tre punti a due stadi II/III
- potenza richiesta 120-180 Cv
- peso 1840 kg
Opzioni aggiuntive:
- altro tipo di rullo
- regolazione di rullo idraulico
- scermi laterali
- una fila di pettini frontali
- carello di trasporto dietro rullo
- kit luci
- Szerokość robocza: 4 m
- Talerzy 450 mm typu cross-cutter
- Piasta bezobsługowa
- Rozstaw między rzędami talerzy: 100 cm
- Wał rurowy 500 mm
- TUZ dwustopniowy kat. II/II
- Zapotrzebowanie mocy: 120-180 KM
- Masa: 1840 kg
Wyposażenie dodatkowe:
- Inny rodzaj wału
- Hydrauliczna regulacja wału tylnego
- Ekrany boczne pływające
- Rząd zgrzebeł przed wałem
- Wózek transportowy za wałem
- Oświetlenie
- Рабочая ширина: 4 м
- Поперечные режущие диски 450 мм
- Необслуживаемый концентратор
- Расстояние между рядами дисков: 100 см
- Трубчатый каток 500 мм
- Двухступенчатая трехточечная сцепка категории II и II
- Требуемая мощность: 120-180 л.с.
- Вес: 1840 кг
Дополнительное оборудование:
- Другой тип катка
- Гидравлическая регулировка заднего катка
- Плавающие боковые экраны
- Ряд сгребен перед валом
- Транспортная тележка за катком
- Освещение